Tunnel Drier
 
Technical Specification | Photo Gallery | Case Study | Product Animation
 
The tunnel drier manufactured by us works on counter-current drying principle. Trolley enters at the exhaust end and leaves at the other end of the drier, upon drying of the material.
 
Tunnel Drier
 
Animation of Our Plant
  • DRYING MODULES :

    Modules comprise of a M.S. Structure upon which insulated panels – 50mm thick are bolted with S.S. Bolts.

  • CIRCULATING FAN MODULES :

    These are modules made of M.S. Structure comprising of insulated panels and axial fans mounted on the same. The Structure is well designed to account for the rotating fan and motor load.

  • AIR INLET-OUTLET DUCTINGS :

    These are structures made of M.S. with insulated panels attached.

  • BLOWER MOUNTINGS :

    Forced and Induced draught blowers are mounted on separate, free standing structures and then connected to the Inlet and outlet ducting as the case be.

  • STRCUTRE AND DUCTING :

    The Drier is mounted on mechanical support structure frame and hence no special foundations are required for our Drier. However, flooring may not be in level and cementing could be required at the bottom of our drier framework to seal gaps if any.

  • AUTO DOOR ARRANGEMENT :

    To minimize manual interference as well as labour required in Door operation, an Auto Door mechanism is installed on the Trolley Exit end of the Drier. The mechanism is automated by us for sequential working with the Drier requirements.

  • INSTRUMENTATION AND SAFETY INTERLOCKS :

    The system offered is extremely simple and convenient to operate. Alarms and safety interlocks have been provided to ensure correct working of the Drier.

  • CONTROL PANEL :

    The panel consisting of sophisticated but user friendly controls enables the operator to run the drier in automatic or manual mode as desired, either on temperature or RH control. Control Panel consists of RH/Temperature controllers, PLCs, Invertors for blowers, Indication lamps, MCBs.

  • SCADA SYSTEM :

    If required, the Tunnel Drier can also be equipped with a SCADA System for remotely controlling the drier parameters and for monitoring the production, parameters etc.
 
 
     
Suntrack Energy Systems Pvt. Ltd.
Plot No. 3004, Phase-IV,
G.I.D.C. Estate, Vatva,
Ahmedabad,
Gujarat, INDIA.
Phone : 91-079-25840362
Fax : 91-079-25840362
Email :
info (AT) suntrackenergy (dot) in
    
Home | About Us | Products | Photo Gallery | Case Study | Enquiry | Contact Us


Our Product Range:

Indirect Hot Air Generator | Direct Hot Air Generator | Gasifier Plants
Tunnel Drier
     
© , Suntrack Energy Systems Pvt. Ltd. Design & Developed by : Bitscape